Atosa MBF8501GRL 27″ Bottom Mount 1-Door Reach-In Freezer, Left-Hand Hinge

Description

Some layouts need the door to swing the other way, and the Atosa MBF8501GRL is built for that: a 27″ wide bottom mount reach-in freezer with a left-hand hinge and 19.1 cu ft of storage. Three shelves and a stainless steel interior hold -8°F to 0°F for frozen proteins, desserts and prep. It suits kitchens where a wall or prep station sits on the freezer’s right side.

Key features

• Left-hand door hinge – opens away from a wall or equipment on the right.
• Holds -8°F to 0°F – the range Atosa recommends for freezer storage.
• Down duct refrigeration – spreads cold air evenly through the cabinet.
• Stainless steel inside and out – wipes clean and stands up to busy kitchens.
• Electronic temperature controller – easy to set and check.
• Magnetic gaskets and door lock – a positive seal, with the stock secured.
• LED interior light and recessed handles – clear view inside, nothing to snag.
• R290 refrigerant – an environmentally friendly refrigerant.
• Pre-installed 4″ casters – roll the unit out for cleaning.

How the MBF8501GRL fits your kitchen

Place the MBF8501GRL at the end of a line or against a wall so the door swings clear into the aisle. The cabinet is 27″ wide, 31-7/10″ deep and 83-1/10″ high, and weighs 265 lb. With 19.1 cu ft and three shelves it covers the frozen needs of a café, small restaurant or bakery. It draws 6.3 A on 115 V, so give it its own circuit, and keep the condenser area clear for airflow.

Other sizes in this series

• MBF8501GR – 27″ wide, one door, 19.1 cu ft
• MBF8531GRL – 25-5/8″ wide, one door, 12.57 cu ft, left-hand hinge
• MBF8502GR – 39-1/2″ wide, two doors, 28.5 cu ft
• MBF8520GR – 24-1/4″ wide, low-height one door, 8.3 cu ft

Why buy from Babak Food Equipment?

• Authorized Atosa dealer – sales, service and installation options, with warranty support coordinated with Atosa.
• 20+ years in business and a 4.9★ Google rating from 380+ reviews.
• Expert advice – our team helps you compare models and check power, gas and ventilation requirements.
• Delivery and installation options across BC – details and costs are discussed when you order.

FAQ

What power does the Atosa MBF8501GRL need?
It is a plug-in electric unit: 115 V, 60 Hz, single phase, 6.3 A, with a 1/2 HP compressor. Atosa calls for a qualified installer, a matching thermomagnetic breaker and a supply within 10% of rated voltage.

What cleaning does the MBF8501GRL need?
Atosa recommends cleaning the inside at least monthly with a food-safe detergent and the exterior with mild detergent and a dry soft cloth, never abrasives. Disconnect power first and keep the condenser free of dust with a dry brush or vacuum.

Where can I find the MBF8501GRL spec sheet?
The official Atosa spec sheet for the MBF8501GRL is in the download section below, along with the manual and parts breakdown. It lists dimensions, capacity, electrical data and shelf part numbers so you can check the fit before you order.

Is the MBF8501GRL the same as the MBF8501GR?
Yes in size and performance: both are 27″ wide with 19.1 cu ft, 6.3 A and 265 lb net weight. The only difference is the left-hand hinge on the MBF8501GRL, so choose it when the door should open from the left.

Please request a quote to confirm availability before you buy. Pricing, availability, warranty terms, delivery and installation are all confirmed at the time of purchase.