Atosa PLUS-R1-GS-R-PT 28-3/4″ Pass-Thru Refrigerator with Glass Front Door and Solid Rear Door (R Version)

Description

Looking for an Atosa pass-thru refrigerator for a tight opening? The Atosa PLUS-R1-GS-R-PT is a single-section unit, 28-3/4″ wide, with a glass front door and a solid rear door. Its 23.7 cu ft and four shelves let cooks load from the prep side while servers pull product from the other, which suits cafés, bars, bakeries and small restaurants that want cold storage between two rooms without giving up much floor space.

Key features

• Front glass door, solid rear door – see the contents from the service side while the prep side stays closed.
• Double pane glass – check product without opening the door.
• Self-closing door with automatic stay-open – closes on its own, yet holds open while you load.
• Heavy duty Cubigel compressor – uses environmentally friendly R290 refrigerant.
• Full electronic controller – straightforward control, with 35°F to 38°F recommended.
• LED interior lights – clear light on every shelf.
• Down-duct air flow channel – spreads cold air evenly through the cabinet.
• Four shelves with pre-installed clips – epoxy shelves you can position as needed.
• Magnetic gasket and standard door lock – a tight seal and secured contents.

How the PLUS-R1-GS-R-PT fits your kitchen

The PLUS-R1-GS-R-PT works well in a wall opening or between two work areas, such as a back kitchen and a service counter. It is 28-3/4″ wide, 33-7/8″ deep and 82-7/8″ high, weighs 313 lb and rolls on pre-installed 4″ casters. Electrical needs are 115 V, 60 Hz, single phase, 3.7 A and a NEMA 5-15 plug. Plan for open space around the cabinet and regular condenser cleaning.

Other sizes in this series

• PLUS-R1-GS-L-PT – the L version, same 28-3/4″ size and 23.7 cu ft.
• PLUS-R2-GS-S-PT – 51-3/4″ wide, four doors, 46.3 cu ft.
• PLUS-F2B-GD-S-PT – 51-3/4″ wide, glass doors on front and rear.

Why buy from Babak Food Equipment?

• Authorized Atosa dealer – sales, service and installation options, with warranty support coordinated with Atosa.
• 20+ years in business and a 4.9★ Google rating from 380+ reviews.
• Expert advice – our team helps you compare models and check power, gas and ventilation requirements.
• Delivery and installation options across BC – details and costs are discussed when you order.

FAQ

What are the installation requirements for the PLUS-R1-GS-R-PT?
Provide a 115 V, 60 Hz, single-phase outlet; the unit draws 3.7 A and has a 1/3 HP compressor with a standard NEMA 5-15 plug. Atosa also asks you to leave the unit room to breathe.

How do I clean the PLUS-R1-GS-R-PT?
Atosa says to clean the condenser frequently. Switch off power, then wipe the stainless interior, shelves, glass door and magnetic gasket with a soft cloth and mild detergent. Never use abrasive pads or steel wool.

Where can I find the PLUS-R1-GS-R-PT spec sheet?
The official Atosa spec sheet is in the download section below, with dimensions, capacity, amps, horsepower and weights for each pass-thru model so you can check clearances and power before you order.

How does the PLUS-R1-GS-R-PT compare with the PLUS-R2-GS-S-PT?
The R1 is one section, 28-3/4″ wide with two doors, 23.7 cu ft and 3.7 A. The R2 is 51-3/4″ wide with four doors, 46.3 cu ft and 4.5 A, for kitchens that need roughly twice the capacity.

Please request a quote to confirm availability before you buy. Pricing, availability, warranty terms, delivery and installation are all confirmed at the time of purchase.