Atosa PLUS-R2-GS-S-PT 51-3/4″ Pass-Thru Refrigerator with Glass Front Doors and Solid Rear Doors

Description

The Atosa PLUS-R2-GS-S-PT is a two-section top mount pass-thru refrigerator with glass doors at the front and solid doors at the rear. It gives a counter or service line a clear view of what is on the shelves while the back of the cabinet stays closed to the prep side. With 46.3 cu ft and eight shelves, it is aimed at restaurants, caterers and cafeterias that load from one side and serve from the other.

Key features

• Front glass doors, solid rear doors – servers see product, while the prep side stays closed.
• Double pane glass – view contents without opening the door.
• Self-closing doors with automatic stay-open – closes itself, but holds open during loading.
• Heavy duty Cubigel compressor – runs on environmentally friendly R290 refrigerant.
• Full electronic controller – easy control, with Atosa recommending 35°F to 38°F.
• LED interior lights – make every shelf easy to read at a glance.
• Down-duct air flow channel – helps distribute cold air evenly.
• Four shelves per section – eight epoxy shelves in all, on pre-installed shelf clips.
• Magnetic gaskets and door locks – locks are standard on every door.

How the PLUS-R2-GS-S-PT fits your kitchen

Place the PLUS-R2-GS-S-PT between a prep room and a front-of-house line, a bar service area or a banquet corridor, so food travels in one side and out the other. It measures 51-3/4″ wide by 33-7/8″ deep by 82-7/8″ high, weighs 518 lb and sits on 4″ casters. Power is 115 V, 60 Hz, single phase at 4.5 A through a NEMA 5-15 plug. Leave room around the cabinet for airflow.

Other sizes in this series

• PLUS-R1-GS-L-PT – 28-3/4″ wide, one section with two doors, 23.7 cu ft.
• PLUS-R1-GS-R-PT – the R version of the same single-section model.
• PLUS-F2B-GD-S-PT – same 51-3/4″ size, with glass doors on the front and rear.

Why buy from Babak Food Equipment?

• Authorized Atosa dealer – sales, service and installation options, with warranty support coordinated with Atosa.
• 20+ years in business and a 4.9★ Google rating from 380+ reviews.
• Expert advice – our team helps you compare models and check power, gas and ventilation requirements.
• Delivery and installation options across BC – details and costs are discussed when you order.

FAQ

What are the electrical requirements for the PLUS-R2-GS-S-PT?
It needs a 115 V, 60 Hz, single-phase supply and draws 4.5 A, with a 1/2 HP compressor. A NEMA 5-15 plug is standard. Atosa also asks for open space around the cabinet so air can circulate.

How should I care for the PLUS-R2-GS-S-PT?
Atosa says to clean the condenser frequently to give the unit more fresh air. Disconnect power, then wipe the stainless interior, glass and gaskets with a soft cloth and mild detergent. Skip abrasive pads and harsh chemicals.

Where can I find the PLUS-R2-GS-S-PT spec sheet?
You will find the official Atosa spec sheet in the download section below. It lists capacity, shelves, electrical data, weights and dimensions for each pass-thru model, so you can check fit before ordering.

Is the PLUS-R2-GS-S-PT the same as the PLUS-F2B-GD-S-PT?
They share a 51-3/4″ width, 46.3 cu ft and eight shelves. The R2 has solid rear doors and weighs 518 lb. The F2B has glass on both sides and weighs 538 lb, so pick by whether you want the rear visible.

Please request a quote to confirm availability before you buy. Pricing, availability, warranty terms, delivery and installation are all confirmed at the time of purchase.