Atosa PLUS-R1-GS-L-PT 28-3/4″ Pass-Thru Refrigerator with Glass Front Door and Solid Rear Door (L Version)

Description

The Atosa PLUS-R1-GS-L-PT is a narrow, single-section pass-thru refrigerator that fits a 28-3/4″ opening between prep and service. It has a glass front door for visibility and a solid rear door, with 23.7 cu ft over four shelves. If you are comparing Atosa pass-thru refrigerators for a café, bar, bakery or small restaurant, this L version is the compact choice that still gives you full-height storage.

Key features

• Front glass door, solid rear door – see the contents from the service side while the prep side stays closed.
• Double pane glass – check product without opening the door.
• Self-closing door with automatic stay-open – closes on its own, yet holds open while you load.
• Heavy duty Cubigel compressor – uses environmentally friendly R290 refrigerant.
• Full electronic controller – straightforward control, with 35°F to 38°F recommended.
• LED interior lights – clear light on every shelf.
• Down-duct air flow channel – spreads cold air evenly through the cabinet.
• Four shelves with pre-installed clips – epoxy shelves you can position as needed.
• Magnetic gasket and standard door lock – a tight seal and secured contents.

How the PLUS-R1-GS-L-PT fits your kitchen

The PLUS-R1-GS-L-PT suits small kitchens that need cold storage shared between two rooms, such as a prep area and a café counter. At 28-3/4″ wide, 33-7/8″ deep and 82-7/8″ high, it takes little floor space and weighs 313 lb on 4″ casters. It runs on 115 V, 60 Hz, single phase at 3.7 A with a NEMA 5-15 plug. Allow room around it for airflow and keep the condenser clean.

Other sizes in this series

• PLUS-R1-GS-R-PT – the R version, same 28-3/4″ size and 23.7 cu ft.
• PLUS-R2-GS-S-PT – 51-3/4″ wide, four doors, 46.3 cu ft.
• PLUS-F2B-GD-S-PT – 51-3/4″ wide, glass doors front and rear.

Why buy from Babak Food Equipment?

• Authorized Atosa dealer – sales, service and installation options, with warranty support coordinated with Atosa.
• 20+ years in business and a 4.9★ Google rating from 380+ reviews.
• Expert advice – our team helps you compare models and check power, gas and ventilation requirements.
• Delivery and installation options across BC – details and costs are discussed when you order.

FAQ

What does the Atosa PLUS-R1-GS-L-PT need to run?
It needs a 115 V, 60 Hz, single-phase supply and draws 3.7 A, with a 1/3 HP compressor. The plug is NEMA 5-15. Leave open space around the cabinet so it can breathe, as Atosa advises.

How do I look after the PLUS-R1-GS-L-PT?
Clean the condenser frequently, as Atosa recommends, to keep fresh air moving through the unit. With power off, wipe the interior, shelves, glass and gaskets using a soft cloth and mild detergent, and avoid abrasive cleaners.

Where can I find the PLUS-R1-GS-L-PT spec sheet?
The official Atosa spec sheet is in the download section below. It lists dimensions, capacity, current, horsepower and weights for each pass-thru model, which helps you confirm the fit before you request a quote.

What is the difference between the PLUS-R1-GS-L-PT and PLUS-R1-GS-R-PT?
Atosa lists them as separate L and R models with matching specifications: 28-3/4″ wide, 23.7 cu ft, 3.7 A and 313 lb. Tell our team which version suits your layout when you request a quote.

Please request a quote to confirm availability before you buy. Pricing, availability, warranty terms, delivery and installation are all confirmed at the time of purchase.