Atosa PCE-18 31-1/2″ Electric Pasta Cooker with Two Tanks

Description

Running two pasta types at once? The Atosa PCE-18 is an electric pasta cooker with two independent 10-gallon tanks in a 31-1/2″ wide cabinet. Each tank has its own 10 kW heating system, so one side can cook while the other sits idle, which suits higher-volume restaurants and banquet kitchens. Each tank has 3-position temperature control, plus a high-limit safety shut-off.

Key features

• Two independent 10-gallon tanks – run two pastas or shut one side down at quiet times.
• 3-position temperature control – set the cooking heat to suit the product on each tank.
• High-limit safety shut-off – the unit shuts off heating if an over-temperature condition occurs.
• SUS316 stainless steel tank – deep-drawn, sandblasted and electropolished, with the tank welded to the top.
• Stainless steel exterior and interior – tough and easy to wipe down.
• Standard basket configuration – (3) 1/3 baskets, (3) 1/6 baskets left and (3) 1/6 baskets right.
• 1″ NPT drain valve and manual water fill – fill through the inlet pipe and valve; empty through the drain valve.
• 4″ to 6″ adjustable legs – level the unit on uneven floors.
• ETL certified – listed on the Atosa spec sheet.

How the PCE-18 fits your kitchen

The PCE-18 measures 31-1/2″ x 35-3/8″ x 44-7/8″ (W x D x H) and weighs 193.8 lb net. It needs a 208 V, 60 Hz, three-phase supply rated for 10 kW per tank, plus a 3/4″ NPT water inlet and 1″ NPT drain connection. Atosa lists typical clearances of 6″ to combustible sides and rear and 0″ to non-combustible surfaces. Have an electrician and plumber confirm the supply and connections against the Atosa spec sheet. Two independent tanks let you cook two products, or keep one side off during quiet periods.

Other sizes in this series

• PCE-9 – 15-3/4″ wide, one 10-gallon tank, 10 kW.

Why buy from Babak Food Equipment?

• Authorized Atosa dealer – sales, service and installation options, with warranty support coordinated with Atosa.
• 20+ years in business and a 4.9★ Google rating from 380+ reviews.
• Expert advice – our team helps you compare models and check power, gas and ventilation requirements.
• Delivery and installation options across BC – details and costs are discussed when you order.

FAQ

What power and water does the Atosa PCE-18 need?
It runs on 208 V, 60 Hz, three-phase power at 10 kW per tank, with a 3/4″ NPT water inlet and a 1″ NPT drain. Typical clearances are 6″ to combustible sides and rear and 0″ to non-combustible. Have licensed trades confirm the hookup.

How do I clean the PCE-18?
Let the water cool before draining through the drain valve, then clean the tank with mild detergent and hot water using a soft cloth or non-abrasive brush. Avoid steel wool on the stainless steel. Follow the instructions supplied with your unit.

Where can I find the PCE-18 spec sheet?
The official Atosa spec sheet for the PCE-18 is in the download section below, so you can check the electrical rating, water connections, tank size and dimensions before you order.

How is the PCE-18 different from the PCE-9?
The PCE-18 has two independent 10-gallon tanks and is 31-1/2″ wide, with 10 kW per tank. The PCE-9 has one 10-gallon tank, is 15-3/4″ wide and uses 10 kW. Choose the PCE-18 for higher volume or two products at once.

Please request a quote to confirm availability before you buy. Pricing, availability, warranty terms, delivery and installation are all confirmed at the time of purchase.